Industry standard and our most popular outdoor PVC banner‑grade material
Standard Banner PVC
- Industry standard banner-grade PVC
- Suitable for both indoor and outdoor use
- High-quality full-colour print
- Standard finishing included
- Printed with fade-proof UV-based inks
Each banner is printed and finished to your requirements.
This is the most popular type of banner and has a multitude of uses at a variety of events, such as advertising banners, street campaign/event banners, corporate event banners, sporting event banners, birthday banners, party banners, etc.
Standard PVC is so versatile its uses are innumerable. It can be used for almost any marketing purpose.
Finishes Available for Standard PVC
Below are the standard finishes available for this material. There are no additional charges for these finishes.
Hems & Eyelets
Banners will be given a welded hem, then eyeletted at equal distributions along the hem.
The standard distribution of eyelets is one per metre. If you require a different distribution or specific placement of eyelets, that’s no problem at all – simply let us know what you need when you place your order.
There is no charge for this finish.
Hems & Corner-Only Eyelets
Banners will be given a welded hem, then eyeletted in the four corners, within the hem.
There is no charge for this finish.
There is no charge for this finish.
Hems Only
Banners will be given a 53mm welded hem.
There is no charge for this finish.
Trimmed to Size
Banners will be cut to the size ordered.
There is no charge for this finish
Trimmed with Eyelets
Same as Trimmed to Size but with the addition of eyelets.
Pole Pockets
A pocket is added to the edges you require to allow a pole to pass through and support/tension the banner.
The diameter of the pocket can be specified by you, however, if you let us know the diameter of the object to go into the pole pocket we can calculate the size of the pocket for you.
Standard Banner PVC Uses
Notice
Please be aware that banners are only temporary signage and we cannot be held responsible for any fitting or installation issues. As with all temporary signage they should be taken down in winds exceeding 30mph.
